Aviom A-16 - Manual (Page 31)

Aviom A-16 Personal Monitor Mixing System
22 23
To mute a Channel:
• Select the Channel first
• Press the
M
UTE
button
• The yellow LED in the Channel button lights
To unmute a Channel:
• Select a muted Channel
• Press the
M
UTE
button
• The yellow LED in the Channel button will go out
Additional Channels can be muted or unmuted by following the same procedure—first
select the Channel, then press the
M
UTE
button.
Personal Mixer Rear Panel
On the rear of the Personal Mixer you will find the A-Net connectors, the power supply
input, and the audio output.
A-Net Connectors
There are two A-Net connectors on the rear of the Personal Mixer.
The A-Net In jack accepts
• the A-Net signal coming from the A-16T Transmitter if the Personal Mixer
is the first Personal Mixer in the system, or
• the A-Net signal coming from the Out jack of another Personal Mixer
The A-Net Out jack is used to connect another A-Net device. This will send the same
sixteen audio channels being processed by the A-16T Transmitter to the additional
device so that another unique monitor mix can be created. An unlimited number of
A-Net devices can be connected in series using this method.
DC Power Input
Connect the DC power supply to the jack on the rear of the Personal Mixer. Use only
power supplies designed for your Aviom products.
Personal Mixer
A-16T A-Net output A-Net In A-Net Out A-Net In A-Net Out
to additional A-Net devices...
Personal Mixer