Volume and pan control, Making changes to channel settings – Aviom A-16 User Manual
Page 29

Aviom A-16 Personal Monitor Mixing System
20
21
There is also one special button combination, the
R
ECALL
button followed by the M
UTE
button. When used together this combination serves a twofold function:
• If there is a sudden change in the audio volume coming through the moni-
tor system, this button combination silences all audio channels instantly.
• When starting from scratch to create a mix, use this function to set all
sixteen channels to zero volume and all pans to the center settings.
All Volumes Zero
Note: The text on the right side of the Personal Mixer reads
“In Recall Mode All
Volumes Zero
” as a reminder that this function is always available.
Making Changes to Channel Settings
The A-16 Personal Mixer behaves in a similar manner to many popular digital mixers.
A simple convention is used: to make a change to a Channel, first select it. Then the
Channel is available for editing.
On the Personal Mixer you can change
•
Volume
•
Panning for mono channels
•
Spread for stereo channels
•
Mute status
•
Grouping
In addition to these changes, you can use Solo Mode to audition your edits to a
Channel while all other Channels are temporarily silenced.
Volume and Pan Control
When you change the volume of a Channel on the Personal Mixer, the LEDs in the
Volume section of the mixer surface will indicate the level in real time. There are
twelve LEDs in the Volume indicator, each capable of displaying two levels, for a total
of twenty-four visible lighted steps.
When a Channel is selected, the current volume is instantly indicated on the LEDs.
When no LEDs are lit, Channel volume is at its minimum setting.