Global controls, Tone controls – Aviom A-16 User Manual

Page 27

Aviom A-16 Personal Monitor Mixing System

saved as Presets.

• Group Mode — Used when creating Groups or editing existing Groups.

This is activated by pressing the

ROUP

button. The Channel Select

buttons are used to add or delete Channels from a Group.

• Solo Mode — When the

OLO

button is pressed, the selected Channel (or

Group) is audible while the rest of the mix is muted.

• Save Mode — This mode is activated by pressing and holding both the

ECALL

and G

ROUP

buttons. When both buttons are held down, the Save

Mode is active. Pressing any numbered button while still holding this
button combination will save your current mix to that Preset location.

Note: A Preset is saved when the numbered button is released.

Global Controls

The three knobs in the upper right section of the A-16 Personal Mixer affect your mix
volume and tone directly. The Bass, Treble, and Master volume controls are always
active, regardless of the selected Preset.

Tone Controls

Use the Bass and Treble controls to change the overall balance of bass or treble fre-
quencies in your mix. These controls affect the entire mix, not the individual Channels.

The default position for the

ASS

and T

REBLE

knobs is at 12 o’clock. To add more

low frequencies to your monitor mix, turn the

ASS

knob to the right of the 12 o’clock

position. To remove lows, turn the knob counterclockwise past the center. To change
the high-frequency content, follow the same procedure; turn the

REBLE

knob right to

add highs, left to diminish them.