Analogue Solutions Vostok Deluxe - Manual (Page 28)

Vostok Deluxe
28 Circuits – Main PANEL | Analogue Solutions
LFO 1, 2, 3
Vostok has three LFOs. LFOs 2 and 3 are identical. LFO speed is voltage controlled.
Typically use LFOs to add modulation to pitch (vibrato), filter cut-off (wah-wah) and VCA level
(tremolo).
LFOs can also be used to clock the Sequencer or trigger the Envelopes
FREQ control
The Frequency control changes the speed of the LFO.
LEVEL control and CV socket
You can alter the speed of LFO1 using a control voltage. For example, an EG output or the
Sequencer CV output. The Level control alters the amount of CV modulation.
WAVEFORM controls and CV sockets
There are Sawtooth, inverse Sawtooth, Triangle and Square wave outputs from the LFOs. The level of each output can be altered with the
Level control.