Analogue Solutions Vostok Deluxe - Manual (Page 16)

Vostok Deluxe
16 Circuits – Main PANEL | Analogue Solutions
GATE socket
This socket outputs 5V when a MIDI Note is held down and returns to 0V when the key is released.
ACCENT socket
Each time a MIDI note with velocity over 80 is received, this socket will output a trigger.
LEGATO socket
If two MIDI notes are overlapped, this socket will output a 5V signal.
CLOCK socket
This converts MIDI Sync to 16 th (semiquaver) analogue clock pulses at 4ppqn.
PROG push button
This is used to set MIDI receive channel and CC CV modulation source.
To set MIDI channel:
Push and hold this button, then whilst holding, press some MIDI keys (any note) or move a MIDI controller (for example, Mod Wheel). Then
release the push button.
The MIDI Receive channel will be set to the channel of the notes that were received.
CC CV will be set to velocity if you pressed MIDI notes in the above programming procedure.
If you moved a MIDI controller (e.g. Mod Wheel) the CC CV will be set to that same controller number.