360 Systems 1200HD-EX - Manual (Page 31)

Page 30 MAXX-1200 Owner’s Manual
System Menu Bar
The System Menu bar contains four menus: Show, Edit, Windows and Help.
Show Menu
Contains selections for the three Channels and the clip management windows.
Channel 1
Channel 2
Channel 3
Opens the specified window if it is closed, brings it to the top and activates it.
Key Commands – F1, F2, F3
Clip List
Opens the Clip Navigator window if closed, brings it to the top and activates it. See page 56.
Key Command – Ctrl+L .
Find Clips
Opens the Clip Locator dialog. See page 56.
Key Command – Ctrl+F .
Edit Menu
Contains a single selection: Configuration. This opens the main System Configuration dialog.
See page 50.
Windows Menu
Choices in this menu change the way the windows are displayed. Use the CTRL+TAB key
combination to change the active window in rotation, or use the mouse to activate the desired
window.
Cascade
Arranges all open windows so that they are overlapping, but offset. It is useful as a starting point
to rearrange the windows. This choice is especially useful with small monitors.
Tile
Arranges all open windows so that each is fully visible at the same time. This choice is
especially useful with larger monitors. In case the Windows don’t tile as expected, select
Cascade to restore their original size and order, then select Tile.
In addition, there are selections for each open transport window. Selecting one of these brings
that transport to the top of the display and makes it the active window.