Panasonic KXL-D721 - Manual (Page 26)

CD-ROM/Audio CD Operation
After installing the software ( P 16), if you start your computer, you are ready lo enjoy
game/photo/audio CDs including the Audio Applications For details about the Audio
Applications operation, refer to the enclosed Audio Applications Manual
Insertion/Removal with Power On (for DOS/Windows 3.1,3 11)
If your computer has a Card Service, the Sound/CD-ROM Interface Card can be
removed or inserted from/into the PCMCIA card slot of the compuer without turning off
yuur computer However, when you start running your computer, make sure that the
Sound/CD-ROM Interface Card is inserted into the PCMCIA card slot and the CD-ROM
player IS on If ASPIS365 SYS and ASPISDBK SYS are being used, Inserlion/Removal
with power on IS not possible
Note
If your computer has more than one slot, and if you want to re-insert the Sound/CD-
ROM Interface Card, make sure to insert it into the same slot it was inserted before
Plug
S
i
Play (for Windows 95)
Windows 95 supports Plug & Play function as the new feature
This Sound/CD-ROM Interface Card supports this feature You can plug/remove this
card in/from your computer When you turn on your computer, Windows recognizes and
sets up your hardware automatically
CD-ROM operation
Before operation make sure that Ihe Sound/CD-ROM Interface Card and l/F Boil are
connected to your computerandio the player properly and all other necessary audio
devices are connected
( P 12-14) The player should be ON when the computer
IS turned on
Notes
■ Some CD-ROMs are soundless
■ The computer sound of some CD-ROMs can be listened through the player's
PHONES jack Connect a commercially available audio connecting cable to Ihe
player's PHONES jack and lo the l/F B om ’ s PHONES jack ( P 14)
26