4 select “exit” by the joystick and press select – Panasonic DVD-A350A User Manual

Page 40

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Initial settings

Select “Exit” by the joystick and press

SELECT,

Setting is

SELECT,

ting is finished and the initial settings screen is displayed.

Note:
•The "Large/Smali" setting has no effect on DVDs recorded

in MPEG 2 audio.

For your reference:
•To output the test signal

1. Select “Test" by the joystick, and then press SELECT.

(Test signals will be output consecutively from each

speaker clockwise;)

2 .

Select the appropriate volume (-6 dB through +6 dB) by

the joystick while the test signal is being output from the
speaker.

3. Press SELECT. (The test signals are stopped.)

Also refer to “Common procedures of initiaf settings” on