Panasonic DVD-A350A User Manual
Page 38
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Initial settings____________
Select the digital output to be output from the optical/coaxial digital
audio output connector of the unit.
1
At the initial settings screen
Select ‘7 Digital Audio Output” by the Joy
stick and press SELECT.
11 LPCM fDVDTOff
2.
Doilbÿ Dlgitïif Bitstream
O&dt
' ■
'ix’ ;
2
Select the preferred item (1-3) by the joy
stick and press SELECT.
When “1 LPCM (DVD)” is selected
Off: Only linear PCM of 48 kHz/16 bit is output from the digital
audio output connector. During playback of the DVD re
corded in the linear PCM of 48 kHz/20 biV24 bit or
96 kHz, no digital audio is output. (Factory setting)
PCM: During playback of the OVD recorded in the linear PCM of
48 kHz/20 bit/24 bit or 96 kHz, digital audio converted to
48 kHz/16 bit is output.
(Digital output of PCM audio is restricted to 48 kHz/16 bit
or below for copyright protection.)
When ”2 Dolby Digital” Is selected
Bitstream:
Dolby Digital (AC-3) bitstream (2ch-5.1ch) is out
put. (Factory setting)
PCM:
PCM (2ch) of 48 kHz/16 bit is output.
When ”3 MPEG” Is selected
PCM:
PCM of 16 bit is output. (Factory setting)
Bitstream:
Bitstream is output.
3
Select the preferred value by the joystick at
each screen and press SELECT.
The screen at the step 1 is displayed. Select “O" by the joystick and
press SELECT to return to the initial settings screen.
For your reference:
•Make settings as shown in the table below depending on the kind of
amplifier that is connected to the optical/coaxial digital audio output
connector.
Type of amplifier
to be connected.
Recommendable setting
1 LPCM (DVD) 2 Dolby Digital
3MPEG
No amplifier is
connected
Off
Bitstream
PCM
AV amplifier
including Dolby
Digital decoder
PCM*
Bitstream
PCM
AV amplifier
including MPEG
audio and Dolby
Digital decoder
PCM*
Bitstream
Bitstream
"■Audio output from the unit’s audio output connectors is converted to
48 kHz/16 bit in addition to audio from the digital audio output co-
nector.To enjoy high quality sound at 48 kHz/20 bit/24 bit or 96 kHz,
connect the amplifier or decoder directly to the audio output connec
tors, not to the digital audio output connector.
[Select “Off at the “1 LPCM (DVD)".]