Panasonic OMNIVISION PV-8402 - Manual (Page 16)

Record On a Tape
'Important: If the remote control POWER, ACTION, PROG, CHA/T , INDEX, or ADD/DLT button does
not work when pressed, press the VCR button on the remote and try the button again.
1^*^Check list before you begin.
□ All connections are made.
(See pages 6-9.)
D VCR is plugged in.
□ TV is turned on and set to the VCR
channel (CH 3 or 4),
1
Insert a cassette with record tab.
VCR power comes on automatically.
Press CH
A/W*
of NUMBERED
keys to select a channel.
• Or, press CHANNEL A/T on the VCR.
• Holding down CH A/T will increase
the channel search speed.
• To record from an outside source,
press CH A/T or INPUT to select
“LINE" (see page 17).
Press SPEED to change the
recording speed.
• SP = Standard Play,
LP = Long Play
SLP = Super Long Play
(See pages.)
Press REC/TIME on the remote control or VCR to
start recording.
* To edit out unwanted portions, press PAUSE to pause the
recording in progress.
To release, press PAUSE again.
(After ttie VCR has been in Pause mode for 5 minutes, it will
stop automatically to protect the tape and video head.)
One Touch Timer Recording (OTR)
The VCR starts recording and turns itself off at a preset time.
In step 4, press REC/TIME repeatedly to set the length of the
recording. Each press will change the stop time as shown.
^►Normal Ree—►0:30—^1:00
-4:00-4—3:00-4—2:00-
►1:00-^^
1:30-4-^
TIMER” lights in the Multi Function Display.
The remaining recording time can be displayed by pressing
DISPLAY in OTR mode.
5
Press STOP to Stop recording.
• Or, press STOP/EJECT on the VCR.
16