Panasonic OMNIVISION PV-8402 - Manual (Page 14)

n On-Screen Displays (OSD)
^Important: If the remote control POWER, ACTION, PROG, CHA/T, INDEX, or ADD/DLT button does
not work when pressed, press the VCR button on the remote and try the button again.
Function & Channel Display
When a function button is
pressed, e.g. PLAY, or
you change channels,
a 4 second display
appears first in large
and then small characters.
Warning and Instruction Displays
These displays will alert you of a missed operation or
08
NO CH FOUND
If no active channels are found
PLEASE CHECK ANTENNA
for CHANNEL MEMORY...
CABLE CONNECTION THEN
(See page 12.) PUSH VCR CH UP KEY AGAIN
Menu Screen
1
Press ACTIONMo
display the menu.
2 Press AT and ^ to
make your selection.
------------------ MENU —......................
SET UP CHANNEL
ID I ОМА/LANGUE:ENGL1SH
SELECT:* ▼ KEY
SET :► KEY
END lACTION KEY
To get the most from each feature,
please read the Operating Manual
before attempting any operation.
VCR Status & Clock Display
Press DISPLAY to display or remove the
overlay shown below.
Function Status
Blank Tape/ No Video Signal Indication
Whenever a blank section of a tape comes up in
Play mode, or when the selected channel has no
broadcast signal with the Blue Back ON/OFF
Feature (page 30) set to ON, the TV screen will
turn solid blue.
If you attempt to set or review
a Timer Recording and the
Clock is not set...
(See page 18.)
After a Timer Program has
been set...
{See page 18.)
If you press REC on the
remote control or VCR,
and a cassette is inserted
with no record tab...
(See page 16.)
If you press PLAY, FF. REW,
or REC on the remote
control or VCR without
a cassette inserted...
(See pages 15,16.)
If you press POWER or STOP
during a Timer Recording...
(visible in VCR mode only)
(See page 19.)
If head cleaning becomes
necessary while playing
back a tape...
(See page 5.)
If you press a function button
other than STOP/EJECT or
POWER while the VCR is in
VCR Lock mode...
(See page 30.)
If you press POWER, ACTION,
or PROG on the remote while
in TV or CABLE/DSS mode...
(See pages 28, 29.)
PLEASE SET CLOCK
BEFORE PROGRAMMI NO
TURN VCR OFF
FOR TIMER RECORDING
AND
LEAVE CABLE BOX POWER ON
CHECK CASSETTE
RECORD TAB
NO CASSETTE
PLEASE INSERT A CASSETTE
TO CANCEL TIMER REC
PUSH POWER THEN STOP KEY
VIDEO HEADS MAY
NEED aEANING
PLEASE INSERT HEAD
aEANING CASSETTE
OR REFER TO MANUAL
END:PLAY KEY
VCR LOCK ACTIVATED
NOW TV/CABLE/DSS MODE
PLEASE PUSH VCR KEY
ON REMOTE
14