Panasonic OMNIVISION PV-8402 - Manual (Page 12)

One Time VCR Setup
*lmportant: If the remote control POWER, ACTION, PROG, CHA/T , INDEX, or ADD/DLT button does
not work when pressed, press the VCR button on the remote and try the button again.
When the VCR is turned on for the first time,
it automatically enters the setup mode.
Setup includes the following:
• Choose the language for on-screen menus
and messages.
• Tell the VCR how your equipment is hookup
(pages 6-9) so the VCR can correctiy place
channels into memory.
as only. Use the buttons on the VCR for
play, stop, rewind, and fast forward functions.
When a program screen is displayed, the REC, FF,
REW, and PLAY buttons on the remote control and
the VCR function as AT-4 ^ only. (See Timer
Recording Using VCR Buttons on page 19.)
12
To Set the Language, Channels, and Clock
1
Turn TV and VCR on.*
2
Tune TV to VCR output channel (the same one you set
on the back of the VCR: CHS or CH4).
3
Press CH
A
for English
on-screen displays.
Or, press CH
T
for Spanish
on-screen displays.
Or, press VCRVTV for French
on-screen displays.
• You can also set the language using the buttons on the VCR,
• If wrong language Is set, see the “Reset all VCR Memory
Functions" section on page 5.
• The VCR should be connected to an antenna or c£^te box (page 6-*9).
SELECT LMUAGE
PUSH VCR CH A: ENGLISH
OPRIUIR VCR CH VtESPAftOL
APP. VCR/TV : FRANÇAIS
Press AT to select your hookup,
and then press 1^ to set.
• If you selected “CABLE/DSS BOX ►
VCR ► TV," continue with step 5.
If not, go to step 6.
• If you are using the CABLE/DSS BOX ►
VCR “
SELECT;A ▼ KEY
SET :► KEY
END : ACT I ON KEY
► TV connection method, only
the cable box output channel will be placed in memory.
SELECT HOOKUP
CABLE/DSS eOXPVCRPTV
CABLE/DSS BOX OUTPUT CH
SELECT
SET
END A ▼ KEY
■4 ► KEY
ACTION KEY
cable box.
O
Press
AT
to select your cable
box or DSS receiver output
channel number, and then
press ► to enter.
• If necessary, refer to your cable
box manual.
■ If you are using Audto/Vtdeo jack connections to your
select and set VIDEO OUT as the outiiut channel.
6
Press CH
A
to start Channel Auto Set.
• “PLEASE SET CLOCK BY PUSHING ACTION KEY” appears.
7
Press ACTION to display the
SET CLOCK screen.
8
Press
AT
to select the MONTH,
and then press to enter.
• Make each entry within 5 minutes,
or the VCR exits the Set Clock screen.
SET CLOCK
___
1/-/--------
SELECT:A ▼ KEY
SET :► KEY
END : ACTION KEY
Press
AT
and to select
and set remaining items at right.
• Pressing ◄ will move back to an item
for correction.
Remaining items
to be set:
• Date • Year
• Time
• DST. (Daylight Saving
Time see page 5.)
10 Press ACTION twice to start
the clock and exit this mode.
----------- SET CLOCK ------ ----------
1/ 4/2000 TUE 12:OOPf,‘
SET ;-4 ► KEY
START : ACT ION KEY