Remote controller will not work correctly – Panasonic NVSD200BA User Manual

Page 18

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Remote controller will not work correctly

SYMPTOM

CAUSE

REMEDY

CHECKED

Remote controller
does not operate
correctly.

Remote controller transmitter

beam is not reaching VTR.

Ensure that remote controller is being pointed at VTR
and that transmitter beam is not obstructed.

Distance is too far.

Use remote controller within 7 m of VTR. If this range

is not possible, replace batteries.

Batteries are exhausted.

Replace batteries. Note precautions for replacement
on page 9.

Batteries are incorrectly fitted
with (4-/-) reversed.

Fit batteries correctly as shown on page 9.