Jllgl mts broadcasta^hs hi-fi stereo system, Receivable broadcast types, Mts stereo and sap broadcast – Panasonic PV-M2768 User Manual
Page 22: Mts stereo broadcast, Sap broadcast, Mono broadcast, Select audio mode for tv viewing
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Jllgl MTS BroadcastA^HS Hi-Fi Stereo System
|\^Check list before you begin.
D
All connections are made {see page 5).
03 Your Ckjmbination VCR is plugged in.
Receivable Broadcast Types
The following are possible broadcast types with their accompanying on
screen displays. The signal being received is indicated with an “ ((t" mark
while the selected audio mode is indicated with an arrow. To change the
audio mode tor these broadcasts, follow the “Select Audio Mode for TV
Viewing” section (below).
Press DISPLAY to display the broadcast signal currently
being received and the selected audio mode.
MTS stereo and SAP broadcast
Multi-channel Television Sound Stereo
(main language) and Secondary Audio
Program (sub language) broadcasts are
being received simultaneously. Select the
STEREO or SAP audio mode as desired.
MTS stereo broadcast
Multi-channel Television Sound Stereo
broadcast is being received. Select the
STEREO audio mode.
• If a stereo broadcast is weak and the
display flickers, you may want to select the
MONO audio mode for better results.
SAP broadcast
Secondary Audio Program (sub language)
broadcast is being received. Select SAP
audio mode for the sub language.
MONO broadcast
Normal monaural sound broadcast is being
received.
STOP 12:00AM WNET
0
:
00:00
►STEREO
SLP
►SAP
MONO
STOP 12:00AM WNET
0
:
00:00
►STEREO ^
SLP
SAP
MONO
STOP 12:00AM WNET
0:00:00
STEREO
SLP
►SAP <-
MONO
STOP 12:00AM WNET
0:00:00
STEREO
SLP
SAP
MONO
Select Audio Mode for TV Viewing
Press AUDIO to select the desired audio mode as described
above. (Arrow shows selection.)
• Each press of AUDIO will change the audio mode as shown below.
Equipped withdbx*-TV Noise
Reduction for true MTS
reproduction.
dbx* -TV Noise Reduction is
required for good stereo
separation and audio fidelity,
dbx* is a registered trademark,
and is licensed by dbx*
Technology Licensing.
22
< Example >
Press
AUDIO
STOP 12:00AM WNET
0:00:00
► STEREO k-
SAP
MONO
r
Press
AUDIO
STOP 12:00AM WNET
0:00:00
►STEREO
SAP
4r
MONO
I
Press
AUDIO
STOP 12:00AM
WNET
:00:00
► STEREO
SLP
SAP
MONO