beautypg.com

Record on a tape, X check list before you begin, Selecting the input mode – Panasonic PV-M2768 User Manual

Page 17: Insert a cassette with record tab, Press ch at, or numbered keys on the, Press rec/time on the, One touch timer recording (otr), One touch recording (otr)

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

Record On a Tape

|\X Check list before you begin.

Q All Connections are made (see page 5).

Q Your Combination VCR is plugged in.

2

4

3

Selecting the Input Mode

You can select the Input Mode in either of the

following ways.

■ Press CH AT . The display will change in

the order below.

— I ir

(CATV)

LINE^<------125 or 69

D

a Press MENU to display the MAIN MENU,

b

Press

AT

to select ‘TV.” and then

press MENU to display the SET UP TV
screen.

c Press

AT

to select “INPUT SELECT.”

and then press ► repeatedly to select
‘TUNER" or “LINE.”

1

Insert a cassette with record tab.

The Combination VCR power

comes on automatically.

Press CH

AT

, or

NUMBERED keys on the
remote control to select a

channel.

• Or, press CH AT on the

Combination VCR.

• To record from an outside

source, press CH

at

to select

LINE input (see bottom of this page).

(k STEREO <-

SAP

MONO

CH 02

Press SPEED repeatedly
until the desired tape
speed is displayed (see
page 28).

SP = Standard Play

LP = Long Play

SLP = Super Long Play

REC

02

Press REC/TIME on the
remote control to start

recording.

• Or, press REC/TIME on the

Combination VCR.

• To edit out unwanted portions,

press PAUSE to pause the
recording in progress. To
release, press PAUSE again.

• You can not view another channel during recording.

TO SET SPECIFIC REC TIME

PLEASE PUSH REC KEY

One Touch Timer Recording (OTR)

The Combination VCR stops recording at a preset time.

In step 4, press REC/TIME repeatedly to set the

length of the recording. Each press will change the

time as shown.

c

Normal Ree—►0:30—►1:00

4:00-^3:00 •«—2:00

1:30-«-^

The PROGRAM TIMER indicator lights on the front panel.

5

Press STOP on the remote control to stop

recording.

• Or, press STOP/EJECT on the Combination VCR.

• While it is possible to change the tape

speed when you are recording, there will
be some distortion on the tape where the

change occurred.

• The remaining recording time of an OTR

can be displayed by pressing DISPLAY.

• After the Combination VCR has been in

Rec Pause mode for 5 minutes, it will
stop automatically to protect the tape and

video head.

17