beautypg.com

Vcr features, Check list before you begin, Vcr lock feature – Panasonic PV-M2768 User Manual

Page 20: Hold down stop/eject on the, To cancel the vcr lock feature, Warning beeper feature, Speaker on/off system, Speaker,” and then press

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

iSPECI^

VCR Features

*lmpor1ant:

If the remote control POWER, CH

at

,

MENU, PROG, ON-TIMER, R-TUNE,
FM/TV and ADD/DLT button does not

work when pressed, press the MAIN

button on the remote control and try the
button again.

|\^Check list before you begin.

Q All connections are made {see page 5).

Q Your Combination VCR is plugged in.

2

3

bc

VCR Lock Feature

When activated, this feature prohibits all operations except for timer

recording and tape eject. This feature maybe used to keep young children

from operating the Combination VCR.

VCR LOCK ACTIVATED

VCR LOCK OFF

Hold down STOP/EJECT on the

Combination VCR for 7 seconds
during Stop or Power OFF mode.

To Cancel the VCR Lock feature,

Hold down STOP/EJECT on the

Combination VCR for 7 seconds again
during Stop or Power OFF mode.

• VCR Lock mode is cancelled automatically after

24 hours as long as the clock is set.

• This feature cannot be activated or cancelled

when a timer or one touch recording is in progress.

NOTE: The on screen message will only be displayed on your TV screen if

the VCR Lock feature is activated in the Power ON mode.

Warning Beeper Feature

When you select BEEPER ON, a short warning will sound each time an

invalid entry or incomplete operation is made.

1

Press MENU* to display’the MAIN
MENU.

2

Press

to select “VCR,”

and then press MENU to display
the SET UP VCR screen.

3

Press AT to select

“BEEPER,” and then press

► to select “ON” or “OFF.”

VCR LWGUAG

m [$] [E

CH CLOCK EXIT

............ SET UP VCR ---

REPEAT PLAY : OFF

SELECT:A ▼ KEY
SET :► KEY
END :MENU KEY

Press MENU twice to exit this screen.

Speaker ON/OFF System

Allows you to turn off the speaker of the Combination VCR when it is
connected to external audio equipment.

20

3 Press MENU to display the MAIN

MENU.

b Press AT ◄ ► to select ‘TV,” and

then press MENU to display the

SET UP TV screen.

C

Press AT to select

“SPEAKER,” and then press

► to select “ON” or “OFF.”

Press MENU twice to exit this

screen.

• In SPEAKER OFF condition, the mute and

volume Up/Down buttons do not function.
The screen at right appears if these buttons
are pressed in SPEAKER OFF mode.