Press the display button, Press the print button – Panasonic PV-PD2000 User Manual
Page 29
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
B □ □ □
□ □□ □
□ □ □ □
rt^-^-HSELECT IMAGE-1 i---------------- 1
4MEM0RY1SET--CANC
e
J i---------1
Use the
M ,
A , and T Buttons to select the image to be
printed.
•The green frame moves each time one of these buttons is
pressed.
•When more than 16 images are recorded, you can go to the
next index Display by pressing the ▼ and ► Buttons several
times.
•The printer does not function while the images are being
displayed.
■Switching the Television Picture from Index Display to
Single-image Display and Printing
1. Press the DISPLAY Button.
•The DISPLAY Button switches
C J
between Single-image Display and
Index Display.
2. Use the
M
and ^ Buttons to select the image to be
printed.
- •The PRINT Lamp lights up. 3. Press the PRINT Button. • Printing starts. •Some images stored in the PC Card may be output to the television screen at a slow rate X 16 images.) Also, when the screen switching button is used to change between the Single-image seconds are required for each image to be •If the image is not displayed properly, remove the card and insert it, and then try to display the image again. •When printing starts, the “--------- ” display shown at the top right of the screen changes to “☆ ------ ”. Printing in progress mark flashes and then lights up. • Do not pull the paper while it is moving during the printing operation. • Do not remove the Paper Cassette while printing is in progress. •Do not take out the Ink Cassette while printing is in progress. •To prevent paper jams, do not allow more than 10 sheets of paper to accumulate at the Print Exit. ra O u a 29
depending on the image.
One image takes about 5 to 30 seconds to
be output to the screen. (An Index Display
takes about 5 to 30 seconds
Display and the Index Display, about 5 to 30
output.
The menu operations do not function when
the picture image is being output.
“☆ ------ Printing in progress
Printing is completed when the ☆
(The ☆ mark indicates the printing progress.)