Panasonic KX-RC22 - Manual (Page 43)

Troubleshooting Guide
If trouble occurs, check the following points before returning the interface
adaptor for service.
Trouble Cause Procedure
The power switch is
on, but the power
indicator is not lit.
The batteries are not
installed or they are
installed incorrectly.
Install the batteries
correctly.
The batteries are dead. Replace the batteries
with new ones.
CPA does not transfer
with the Macintosh.
The interface adaptor,
the CPA, or the
Macintosh is not
turned on.
Turn on the interface
adaptor, the CPA, and
the Macintosh.
The cable of the
interface adaptor or
the Macintosh to
Modem cable is not
connected properly.
Properly connect the
cable of the interface
adaptor and Macintosh
to the Modem cable.
Specifications
Power Source
Interface
Operating Temperature
Operating Humidity
Storage Temperature
Dimensions
Mass {Weight}
Battery Life
4 “AA” size batteries DC 6V
RS-232C
5°C (41T)—35°C (95°F)
20—80% RH
-20°C (-4°F)—60°C (140°F)
115(W)x173(D)x35 (H) mm
(417/^2" (W)x6iyi6" (D)xm" (H)}
0.225 kg (0.5 lb)
About one hundred days
When sending data 4 times a day
at 20"C (68T)
43