Panasonic KX-RC22 - Manual (Page 17)

Setting Communication Parameter_______
Before starting, confirm that the baud rate is the same in the CPA and Macintosh
(baud rate 9600 is factory set for communication options).
1
Operation
Select “Port Settings”
in the Communications
menu.
Display/Description
4 File Edit I Conimuniiatiuns
Poi t Settings...
Utindouis Cards
Set the parameters.
Example;
Baud rate: 9600
Port:
Modem
Communication options
Baud Port
o 2400 ($ Modem
O 4800 ^Printer
($9600
[ Cancel ] j' OK ^
•When you connect the Modem cable
with the Printer port, select the
“Printer”.
• If a serial printer or Appletalk printer is
using the port, the CPA will warn,
“Serial port was in use by another
application”. Select Chooser in the
Apple menu and turn off Appletalk. If
another application is interfering, then
it must be turned off.
tQ
?
3
3
c
3
2'
n-
3
i
(S’
Click OK
•The other parameters are
automatically set as you see below:
Parity bit: no parity
Stop bit: 1 bit
Data length: 8 bits
>To set the baud rate of the CPA, see the operating instructions for the
CPA unit.
17