Configuring ssl/tls and configuring http services – Panasonic NN46110-600 User Manual
Page 76
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
66 Chapter 2 Configuring servers
— File extension—
cacert
— MIME Type—
application/x-x509-ca-cert
— Application to use—
netscape.exe
e
Click
OK
to complete the Netscape configuration.
f
Save the
base64 format root CA certificate
onto a file with extension
.cacert
.
g
Select
File > Open Page
and open the file. Netscape Communicator
guides you to install the CA certificate.
• In Internet Explorer, select
Tools > Internet options > content >
certificates > trusted root certification authority
tab and select
import
.
3
Import the
root certificate
that issued your VPN Router server certificate into
the JRE certificate store.
Note:
To satisfy a further name check by Netscape browsers, make the
VPN Router server certificate common name either a DNS name that
resolves to the management IP address or the management IP address.
Configuring SSL/TLS and configuring HTTP services
To configure SSL/TLS and enable HTTP services:
1
Select
Services > Available
and check
HTTPS
services on the public and/or
private interfaces. This allows TCP port 443 through the system filter. If you
enable HTTPS on both the public and private interfaces, it allows port 443
through either interface. Figure 10 shows the Services window with port 443
selected for HTTPS.
Note:
You can change the port from port 443 to run HTTPS. This allows
you to configure an SSL VPN server at the default 443 port while still
allowing HTTPS management.
NN46110-600