Panasonic NN46110-600 User Manual
Page 30
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
20 Chapter 1 Authentication services
RADIUS default group. You configure the IPsec Group ID in the Authentication
section of the Profiles > Groups > Edit > Configure IPsec window. You configure
the PPTP default group on the Servers > RADIUS Auth window, RADIUS Users
Obtain Default Settings from the Group option.
Note:
The group that the user is bound to must allow the authentication
method that is used when the session is started.
If the UID is not in the profile LDAP (internal or external) database and if you
specified LDAP proxy as the next server to check, the UID and password is
checked against the LDAP proxy database.
Figure 3 illustrates the steps in user validation.
NN46110-600