Configuring ssl administration – Panasonic NN46110-600 User Manual
Page 73
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Chapter 2 Configuring servers 63
To add a DHCP relay interface:
1
Select
Servers > DHCP Relay
and click
Add
.
2
Select a
Physical Interface
from the list.
3
For the
state
, select either
Enabled
or
Disabled
.
4
For the
DHCP Server
, enter the IP address and then click
Enabled
for
Helper 1
,
Helper 2
, and/or
Helper 3
.
5
Click
OK
.
To view DHCP Relay statistics:
1
Select
DHCP Relay
.
2
Click
Statistics
.
The DHCP Relay Statistics window provides the following details:
•
In—total number of all of the incoming DHCP packets
•
Out—^total number of forwarded DHCP packets
•
Discarded—^total number of incoming packets that were ignored because of
bad content
•
Relayed To Server—total number of packets forwarded to a DHCP server(s)
•
Relayed To Client—total number of packets forwarded to DHCP client(s)
Configuring SSL administration
The SSL administration feature enables secure management of the VPN Router
over SSL-enabled HTTP (HTTPS) and is used over all tunnel and interface types.
Remote management of a VPN Router requires only an SSL-enabled Web
browser on the administrator's computer, which most operating systems include.
Figure 9 is an example of SSL administration.
Nortel VPN Router Security — Servers, Authentication, and Certificates