Configuring ldap proxy server authentication – Panasonic NN46110-600 User Manual
Page 43
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Chapter 2 Configuring servers
33
Configuring LDAP proxy server authentication
The VPN Router supports authentication against an existing LDAP server rather
than creating a second user database for use with the VPN Router. The server can
reside on either a private or public network that is connected to the VPN Router.
Note:
You must enable CSFW for the public interface to work with
LDAP proxy server authentication.
You can configure the type of authentication methods that can access the existing
LDAP server. The authentication options are:
PAP (Bind authentication)
PAP
CHAP
MS-CHAP
MS-CHAP V2 (Bindname authentication)
The VPN Router supports LDAP V2 servers.
Figure 5 shows the authentication mechanism used between the VPN Router and
the external LDAP proxy configuration.
Figure 5
LDAP proxy server
Nortel VPN Router Security — Servers, Authentication, and Certificates