2 click enable tripledes, Configuring ldap user encryption key, 1 select servers > ldap – Panasonic NN46110-600 User Manual

Page 38

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Chapter 2 Configuring servers

Figure 4

Enable 3DES window

Click

Enable TripleDES

The 3DES Confirmation window appears. When TripleDES is enabled, all

passwords within the box are encrypted with 3DES as well as any future
passwords that are entered.

To confirm the 3DES encryption, click

To enable 3DES with the CLI, enter the following command:

Idap-server tripledes-enable

Configuring LDAP user encryption key

With the LDAP user configurable encryption key, you can set your own

user-defined encryption key instead of the default encryption key that is present on
the VPN Router. If you use a user-defined encryption key with an external server,

all the VPN Routers that use that external LDAP server must have the same

configured encryption key..

âs

Warning:

To return to the default encryption key, after you set a

user-defined key, you must reset the VPN Router to factory defaults.

You can use the GUI or the CLI to configure the LDAP user configurable

encryption key.

To change the existing encryption key:

Select

Servers > LDAP.

NN46110-600