Change to the tuner mode, Selecting a band, Manual tuning – Panasonic CQ-R145U User Manual
Page 10: Seek tuning, To reduce interference during fm broadcasts (mono), Radio basics, 1 ipfia? manual tuning
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
I
Radio Basics
1
1
Hold e
n
- a—
nd releaseTtsL
Change to the tuner mode
® In case of Tape mode ................................ Eject a tape.
(
2
) In case of CD Changer mode..................... Press [BAND].
Selecting a Band
Press [BAND] to change the bands as follows.
FM2 FM3 ^
FM1
AM
*
"ST" indicator lights during reception of a stereo broadcast.
£1 iPfia?
Manual Tuning
Press
[/\TUNE]
or
[SEEKV]
to tune in a higher or lower frequency.
Seek Tuning
Press and hold
[ATUNE]
or
[SEEKV]
for more than 0.5 seconds,
then release. Seeking will automatically stop when the signals of the
next broadcast station are received.
To reduce interference during
FM broadcasts (MONO)
Press and hold
[SEL]
for more than 2 seconds for monaural reception
in case a lot of interference is present in an FM stereo signal or to
improve the listening quality
o f
weak FM broadcasts. To turn it off,
press
[SEL]
for more than 2 seconds again.
10
il
CQ-R145U