Connecting cpa to household ac – Panasonic KX-RC105 User Manual

Page 16

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Text mode
Original mode

Connecting CPA to Household AC_______

Before operating CPA connect it to the household AC outlet (AC 120 V) with

the AC adaptor for about three (3) hours in order to charge the battery. (While
charging you can operate CPA. However, it will take longer for it to charge.)

To turn on CPA, slide the power switch in the direction of the arrow for about one

(1) second, until the display appears.

To turn off CPA, slide the power switch again in the same direction until the
display disappears.

If CPA is not in operation for more than 5 minutes while using battery power,

it automatically shuts off to prevent battery drainage.

Turn the power switch on again to resume using CPA.