Transferring data – Panasonic KX-RC105 User Manual

Page 107

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Text mode
Original mode

Transferring Data

»To stop transferring data, press [DONE) on either CPA-a or CPA-b.

The display will show:

LINK CANCELED *

On the other CPA, after a while, the display will show:

LINK ERROR !

The data on the way is gone in the CPA-b.

»When an error occurs, transferring will not start, or stop and the display

shows:

LINK ERROR !

MEMORY FULL t

Before starting the transferring, make sure that the memory size of CPA-b is
larger than the existing data size of CPA-a. If not, delete some records of

CPA-a.

►Link errors occur in the following cases:

1. Baud rate is different between CPA units.

2. CPA units are not connected correctly by the interface cable.

3. The address data is sent to KX-RCIOO.
4. The phone data is received from KX-RC100.

-*•

&>
fi)

107