1 press pdpro logic, 2 playback a dolby surround source, To cancei – Panasonic SC-DK2 User Manual
Page 39: Speaker leve! adjustments, Remote control only, To stop the test noise, To select a specific speaker
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

; □ □ n
) n r T r
■ » MU
u u tJ
1
u
(D
TEST
mm
+
T c 7
i C H i t_ u h
Vf-si'' ■■■
PJ-,
:L _____ ______ J’
■>' [^|nnnS": SlUlw® ' ■. •';■
Enjoying surround sound
1
Press PDPRO LOGIC].
The button lights.
2
Playback a Dolby Surround source.
To cancei
Press [nDPRO LOGIC],
The light turns off.
Turn Doiby Pro Logic off when playing a DVD recorded with 5,1-
channei Dolby Digital. The surround effects will not be reproduced
correctly if this is left on.
Speaker leve! adjustments
if the level of the speakers appears to be different while listening to a
source, adjust the level of the speakers to the same apparent level.
Sit in the normal listening position and make the adjustments with
the remote control.
Preparation: Press PDPRO LOGIC] to turn the light on.
Remote control only
CD
Press [SHIFT] [TEST] to output a test signal.
A test signal is output from the speakers in the following order,
Lch: Front left speaker
Cch: Center speaker
Rch: Front right speaker
Sch: Surround speakers
The speaker’s indicator flashes white the speaker is outputting
the test signal.
CD
Press [VOLUME (- or +)] to set the volume level of the front
speakers normally used for enjoying the source.
(D While the speaker to be adjusted is outputting a signal
Press the cursor buttons [A] (to increase level) or [V] (to
decrease level) to adjust the level of each speaker.
Lch, Rch: -16dBto0dB
Cch, Sch: -10 dB to +6 dB
Repeat step d) to adjust the level accordingly.
fn
c
s
?
I
■O
.Si
■O
§
- VOLUME +
ZZO c
0
C c h
j- ( z 73 ;
^ I O .
To stop the test noise
Press [SHIFT] -+• [TEST] again.
To select a specific speaker
1. Press [SHiFTl + [CH SELECT] to select the speaker.
Each time you press the buttons:
Lch Cch ->■ Rch ->■ Sch
s
o-
T3
c
3
5
2. White the speaker's indicator is flashing
Press the cursor buttons [A] or [▼] to adjust the level.
BQT5327