Display/ -demo, 1 press power] to turn the unit on, 2 press [clock/timer] to display “clock – Panasonic SC-DK2 User Manual
Page 12: 4 press [clock/timer, Displaying the clock, Turning demo off
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

I
Ql
I
OQ
1
2 , 4
■T-C3
. -DISPLAY/
-DEMO
1
POWER
on
CLOCK/
TIMER
r )
n r i.'
f_ i_ U L. M
-7^
n
Krf (3n n;
»111 I U'U u '
^/HS
V- TUNE/TIME ADJ
J
TUNETriME ADJ /\
fi3 II'I
/ I
&
\*
Setting the time
For U.S.A.: 12-hour clock
For others: 24-hour clock
The example shows how to set the 12-hour clock for 4:25 p.m.
(16:25}.
1
Press POWER] to turn the unit
on.
2
Press [CLOCK/TIMER] to display
“CLOCK”.
Each time you press the button:
CLOCK->©PLAY^®REC-^Original display
O (Within 5 seconds or so)
Press [V TUNE/TiWlE ADJ] or [TUNE/
TIME ADJ A] to set the time.
The time display can be changed in one minute units by tap
ping the buttons, and quickly by holding down the buttons.
4
Press [CLOCK/TIMER].
The time is set and the original display is restored.
Displaying the clock
When the unit Is off
When ECO mode is off;
The clock is displayed constantly.
When ECO mode is on;
Press (-DISPLAY/-DEMO].
The dock is displayed for about 5 seconds and then the display goes
blank again.
When the unit Is on
Press [CLOCK/TIMER] to display “CLOCK".
The clock is shown for about 5 seconds then the previous display is
restored.
Turning DEMO off
CLOCK/
TIMER
-DISPLAY/
-DEMO
A ( n
» U
71
1„
n ;
JJ u
I ( U '
A demonstration of the display is shown if you have not set the clock.
Turn DEMO off to get the most from ECO mode.
Press and hold [-DISPLAY/-DEMO] until
“NO DEMO” is displayed.
Each time you press and hold the button:
NO DEMO (off) DEMO (on)
RQT5327