Cursor, Buttons, Enter – Panasonic SC-DK2 User Manual
Page 15: Numbered, Menu, Discs, 1 press a [±] button to open the tray, 4 adjust the volume, To stop the disc, S) ” is displayed on the tv
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

£^~f- Disp
number
O
O
0
0
o
"n i n~1 ICLL-J CX]__t cri_j
4
>- d); O 0 : ® .WUfflU: ' |iii. I i|- TOP M E N U — i S l Cursor ENTER Numbered MENU O"------- RETURN TITLE MENU Dogs Castles Lovers ...... ........i Birds Discs Screens itiustrated are examples. CD Preparation: Turn the television on and switch the video input mode on the televi sion to suit the type of connection you have made (e.g. VIDEO 1). 1 Press a [ ± ] button to open the tray. The unit comes on automatically, 2 Set the disc on the tray and press the same [±] button to close the tray. The tray closed is in the play position (its disc indicator lights). Some discs start playing automatically. 3 Press [1H5] to change the play posi tion tray and start play. Remote control: Press [DISC] ->■ [1]-[5]. O It a menu screen appears on the television Remote control only press [ENTER], e.g. Title No. 12: [>10] ^ [1] ^ [2] 4 Adjust the volume. Use the CD MANAGER’S ALL-DISC mode to piay CDs and Video CDs in succession (»^ page 25). To stop the disc Press [0]. • With some discs, playback may start without showing the menu screen. To show the menu screen: DVD : Press [MENU], [TOP MENU] or [RETURN] on the re mote control, Video CD : Press [RETURN] on the remote control, • The disc continues to rotate while the menu is displayed even after a particular item has finished. When no more items are to be se “ (S) ” is displayed on the TV When the operation is prohibited by the unit or the disc. “ ^ ” is displayed on the unit’s display When there are 15 or more tracks on the disc (CD and Video CD “ ” is displayed on the unit’s display When a DVD is in the play position tray. “ IHI'IINTITIF ” displayed on the unit’s display When a Video CD is in the play position tray. “NO DISC” is displayed on the unit’s display When there is no disc on the selected tray or the disc is set incorrectly. “NO PLAY” is displayed on the unit’s display When the disc does not correspond to the unit and cannot be played. “96kHz 24bit” Is displayed on the unit’s display bqtsszt
buttons
buttons
Load other trays by repeating steps 1 and 2.
Use the cursor buttons (■<, >, A, T) to highlight an item and
You can also select the desired item by pressing the num
bered buttons with some discs.
To select title No. 10 or over, press 1^10] then the two digits,
lected, be sure to press |0] to clear the menu display,
without PBC).
When the disc is one with high quality sound recorded with a sam
pling frequency of 96 kHz and 24 bits.