1 press [3d al eq] to select the surround level, To cancel – Panasonic SC-DK2 User Manual
Page 34
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Changing sound field and quality
Achieve subtle sound quality settings with the soft, sharp, heavy,
and light coordinates.
1
Press [3D Al EQ] to select the sur
round level
Each time you press the button;
Al EQ 3D AI1 ^ 3D Al 2
Remote control: Press [SHIFT] + [3D AI],
(Within 10 seconds)
Change the sound quality with the
joystick ( < , A, T).
(D Adjust softness and sharpness with [◄] or
(D Adjust heaviness and lightness with [A] or [T],
Repeat steps ® and ® to set the desired sound quality.
The original display is restored on the display panel in about
10 seconds.
L
I
§
0
'Si
?
§•
5
•Si
■o
1
0
1
I
•O
§
5
.i_-
= ■ Jl-j
LWHT
To cancel
Dial [SOUND CONTROL JOG] to select “FLAT”.
The changes you make are stored and automatically recalled the
next time you press [3D Al EQ] or select “AI-EQ” with [SOUND
CONTROL JOG],
® “3D Ai 1" and “3D Al 2” cannot be selected while the surround sys
tem (=» page 36) or karaoke mode (except for U.S.A., Australia and
New Zealand) (»► page 45) is on.
* “3D Al 1” and “3D Al 2" cannot be selected when you are playing a
DVD (except for MIX 2CH mode).
QT5327