Changing initial settings, Speaker setting, I;w.g?pzn – Panasonic DVD-RV41 User Manual
Page 25: Speaker presence and size
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

DVD I
Changing initial settings
Speaker setting
i;w.g?pzn
Select either '2-channer or “Multi-channer to suit the speakers you
have conr^ected. You can change the following settings when you
select 'Multi-channer.
Speaker presence and size
,
1. Press
to select the item and press (ENTER].
2. Press [ A . T ] to select the setting and press [ENTER].
Icon examples: Surround speaker (L)
Large: when the speaker supports low-frequency (under 100 Hz)
reproduction.
Smalt: Select when the speaker does not support low-frequency
reproduction.
1Tte size setting for the front speakers is automatically determined by
the setting for the subwoofer
Delay time
(Dolby Digital, center and surround speakers only)
For optimum listening with 5. t -channel sound, all the speakers, ex
cept tor the subwoofer, should be the same distance from the seating
position. If you have to place the center or surround speakers closer
to the seating position, adjust the delay time to make up for the differ
ence.
If distance (a) (from the center s[>eaker) and Q
surround
speakers) are the same as or greater than 0 (from the front speak
ers}. leave the delay hme as D’. the factory preset.
If either distance 0 or 0 is less than 0. find the ditferer>ce in the
relevant table and change to the recommended setting.
«Center speaker
Difference
Setting
Approx. 50 cm
1.3 ms
Approx,
too
cm
2.6 ms
Approx. 150 cm
3.9 ms
Approx. 200 cm
5.3 ms
•Surround speakers
Difference
Setting
1
Approx. 200 cm
5.3 ms
1 Approx. 400 cm
10.6 ms
¡ Approx. 600 cm
15.9 ms
Changing the delay time
1. Press [ A . T . - d , ^] to select the delay time box and press
[ENTER].
2. Press [A.T] to adjust the delay time and press [ENTER).
Channel balance
1. Press ( A . ▼ . • < . ►] to select '•Test*' and press [ENTER].
A test signal is output from one speaker at a time, starting with the
front left speaker and proceeding clockwise. (0)
2. While listening to the test signal, press [ A . ▼] to adjust the
volume of the center and surround speakers so they are the
same apparent volume as the front speakers.
(The front speakers cannot be adjusted here )
3. Press [ENTER).
(The test signals are stopped.)
No Signal is output for the subwoofer. To adjust its volume, play
something, then return to this screen to adjust to suit your taste.
When you are finished
PressjA. ▼, - 4 . ►] to select “Exit’and press (ENTER).