Mts broadcasta^hs hi-fi stereo system, Receivable broadcast types, Select audio mode for tv viewing – Panasonic AG-527D User Manual
Page 24: A check list before you begin, Example
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
1
q
PI
© ©
MTS BroadcastA^HS Hi-Fi Stereo System
\\A Check list before you begin.
□ All connections are made (see page 5).
□ Your Combination VCR is plugged in.
Receivable Broadcast Types
The following are possible broadcast types with their accompanying on-screen
displays. The signal being received is indicated with an “ ({<” mark while the
selected audio mode is indicated with an arrow. To change the audio mode for
these broadcasts, follow the “Select Audio Mode for TV Viewing” section, (below)
DISPLAY
a
Push DISPLAY to display the broadcast signal
currently being received.
MTS Stereo and SAP broadcast
Multi-channel Television Sound Stereo
(main language) and Secondary Audio
Program (sub language) broadcasts are
being received simultaneously. Select the
STEREO or SAP audio mode as desired.
MTS Stereo broadcast
Multi-channel Television Sound Stereo
broadcast is being received. Select the
STEREO audio mode.
• If a stereo broadcast is weak and the
display flickers, you may want to select
the MONO audio mode for better results.
SAP broadcast
Secondary Audio Program (sub language)
broadcast is being received. Select SAP
audio mode for the sub language.
MONO broadcast
Normal monaural sound broadcast is being
received.
STOP 12:00AM WNET
0:00:00
gtSTEREO
*r
SLP
frSAP
MONO
STOP 12:00AM WNET
0:00:00
^STEREO
SLP
SAP
MONO
STOP 12 : OOAU
WNET
0:00:00
STEREO
SLP
e-SAP
MONO
STOP 12:00AM
WNET
0:00:00
STEREO
SLP
SAP
MONO
^
Equipped withdbx'*’-TV Noise
Reduction for true MTS
reproduction.
dbx^'-TV Noise Reduction is
required for good stereo separation
and audio fidelity.
dbx*
is a registered trademark, and
is licensed by
dbx*
’Technology
Licensing.
24
Select Audio Mode for TV Viewing
AUDIO
Push AUDIO to select the desired audio mode
as described above. (Arrow shows selection.)
• Each push of AUDIO will change the audio mode as
shown below.
< Example >
.Push
AUDIO
STOP 12:00AM WNET
0:00:00
£LE_
((■STEREO ^
SAP
MONO
LPush
AUDIO
STOP 1
2
:00AM WNET
0
:
00:00
^STEREO
SLP
SAP
MONO
LPush ^
AUDIO
STOP
12: 00AM
WNET
0:00:00
»■STEREO
SLP
SAP
MONO