Panasonic AG-527D - Manual (Page 14)

TV Timer Features
k^Checfc list before you begin.
□ All connections are made (see page 5).
□ Your Combination VCR is plugged in.
On Timer Feature
The Combination VCR can be set for auto power on. Even if you set the On
timer, it will not be performed during Timer Play or Play Lock mode.
Push ON-TIMER to
“'jfflMf'’ display the ON TIMER
screen.
I---- xt/Or
/|\ /|\
........
SELECT :* T KEY
SET :► KEY
END :ON-TIUERKEY
SELECT CH/PLAY
Push A V to select and
to fix the On Timer time
and then to choose the
On Timer mode (TV or
PLAY).
■ You can choose TV or PLAY
for the On Timer mode only
when TUNER:ON is selected
(page 8).
• Make sure a tape is inserted
if VCR Playback mode is
selected.
To Make Corrections,
use ¿i. vand 0 0 to move back and correct as necessary.
.............. ON TIUEFR H--/-------------
6:00AM CH125
/ I I \
KEY CANCEL:ADO/DLT
SELECT:
A T KEY
SET ► KEY
END :ON-TIMERKEY
ON-TIMER
a
Push ON-TIMER to set the
On Timer. This screen will
appear for about 5 seconds.
• The ON TIMER indicator lights on
the front panel.
ON TIMER SET
To Cancel,
push ON-TIMER to redisplay the screen in step 2. Then, push ADD/DLT
to clear the time (“6” is flashing). Now, push ON-Timer to end. “ON
TIMER END” appears on-screen for a few seconds.
If no button on the remote or Combination VCR is pushed within 60
minutes after the Combination VCR turns itself on, it will turn itself
back off.
Set the Sleep Timer
The Combination VCR can be set for auto power off.
SLEEP
O
Push SLEEP to display the
desired sleep timer.
• Each push of SLEEP will change the
time in the order shown at right.
If you push DISPLAY with the SLEEP TIMER set,
the remaining time will appear on-screen.
Sleep Timer will not be performed during Timer Play
or Play Lock mode.
SLEEP TIMER 30
♦
SLEEP TIMER 60
SLEEP TIMER 90
♦
SLEEP TIMER 00
14
To Cancel, push SLEEP repeatedly until “SLEEP TIMER 00” appears.