Timer recording, Remaining items, To make corrections – Panasonic AG-527D User Manual
Page 22: To enter more programs
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Timer Recording
Your Combination VCR can be set up to
do a recording while you are away or
otherwise occupied. Up to 4 programs
can be placed in memory. You can
choose to record one time, daily, or
weekly.
Push PROG to display
the “SET PROGRAM”
screen.
si.
Check list before you begin.
□
ah
connections are made (see page 5).
□ Your Combination VCR is plugged in.
□ The clock is set.
□ The tape is long enough.
^The record tab is in place.
Push
to select
------ SET PROGRAM
TIMER PLAY
TIMER RECORDING
SELECT
SET
END
:* ▼ KEY
:► KEY
;PROG KEY
“TIMER RECORDING,”
and then push to
display the program
screen.
•If a program is already in
memory, push
q
V
repeatedly, and then to
select an unused program number.
№_
SELECT START DATE
SELECT:* ▼ KEY
SET :► KEY
END :PROG KEY
SLP
Push A V and l^to select and
set one of the following:
1~31
= One time recording
DAILY = Same time MON ~ FRI
WEEKLY = Same time once a week
Example
■31— 1 —2'
Today’s
Date
7
SELECTA/T
Selection
Order
DAILY
(^WEEKLY......... .WEEKLY___ WEEKLY _J
PROGRAM TIMER Indicator
(SAT)
(MON)
(SUN)
Push A Vand <| [>to
select and set each of
the remaining items at
right.
(D
Remaining Items:
• START time
• STOP time
• CH(annel) number,
or LINE for outside
source recording
• Speed {SP, LP, SLP)
To Make Corrections
Repeatedly p u s h t o move the cursor to the right, or<)to move to
the left to the incorrect entry and make the correction.
Push PROG to end the
program.
• This screen appears for
confirmation.
P DT START STOP CH SPD
2
-----
3
4
To Enter More Programs
Push A ^ and E^to select and set a blank
program number, and then repeat steps 3 and 4.
CANCEL:ADD/DLT KEY
SELECT 1-4;* ▼ KEY
ENTER :► KEY
END :PROG KEY
Push PROG twice to return to the normal
screen.
• The PROGRAM TIMER indicator lights on the
front panel.
• If you’re using a cable box, make sure that it is
tuned to the desired channel and the power is left
on for timer recording.
22
Two minutes before
the Timer Recording starts, “TIMER REG WILL
START SOON” will appear on-screen.