Panasonic OMNIVISION PV-M2066 - Manual (Page 6)

One Time Setup
Check list before you begin.
^ Your Combination VCR is connected to an
Antenna, or Cable system {see page 5).
□ You’ve read over the Select/Set Wheel
operation, below.
To Set Language, Channel and Clock
When the Combination VCR power is first turned on, the channel auto set and
set clock screens appear automatically.
О
Turn the Combination
VCR on.
CHUP
Using the Seleet/Sel Wheel
There are basically two types of Wheel operation.
• Selecting items from an on-screen display.
• Entering information, such as setting the clock.
OPERATION
(up or down) (like a button)
ROTATE TO SELECT ROTATE TO SELECT
Qi
CH i
or
CH i
0
^
Push CH UP or DOWN
for on-screen displays
in English or Spanish.
SELECT LANGUAGE
PUSH CH UP :English
PULSE CH DOWNiEspaftol If you choose the wrong
language, please see the “Reset
all Combination VCR Memory
Functions” section on page 28.
If you use a cable box, the cable box must be left on for
auto channel set.
Important: If you use a cable box,
turn it on and select PBS
station in your time zone.
Push CH UP to start
Channel Auto Set and
Clock Auto Set.
These on-screen displays will appear in sequence.
■ CH AUTO SET PROCEEDING
• CH AUTO SET COMPLETED
• AUTO CLOCK SET PROCEEDING
Q;
CH i
CHANNEL/CLOCK AUTO SET
CONNECT AfTTENNA CABLE
AND IF YOU USE A CABLE
BOX,TUNE IT TO YOUR
LOCAL PBS CH THEN. . .
PLEASE PUSH CH UP KEY
sir
or-
sk
(fcase f)
12/25/1996 WEO 12:00PM
DST:ON
SETTING : CH 10
AUTO CLOCK SET
COMPLETED
END : PUSH CH UP KEY
;ase
AUTO CLOCK SET
IS INCOMPLETE
PUSH MENU TO SET CLOCK
Confirm that displayed time is correct and
push the CH UP button to exit.
If the displayed time and D.S.T. are incorrect,
please proceed as follows:
In the rare event that you live close to two different time zones,
the Combination VCR may recognize the wrong PBS station
as the setting channel. In this case, please do the following:
1 Make a note of the SETTINGiCH number shown on-screen
and push the CH UP button to exit.
2 Delete the setting channel from the Combination VCR channel
memory. (See the Add or Delete a Channel section on the next
page.)
3 Push the MENU button to display the menu.
4 Use the WHEEL to select “CLOCK" and then to select “AUTO
SET.”
• If you use a cable box and have multiple PBS stations, tune
the cable box to a different PBS station and try auto clock
set again using the menu.
If the screen above appears, auto clock set is
not available in your area. Please set the clock
manually as described on the next page.
to make selection to enter selection
To view the deleted channel, please select with the NUMBERED keys,
if for any reason, the time is changed manually, automatic time
correction will not occur.
Auto clock set will be performed when the Combination VCR is
turned off the first time each day. If you use a cable box and you
want auto dock set to be performed, the cable box must be left
on and the PBS channel is tuned at the Combination VCR power
is turned off.