Panasonic OMNIVISION PV-M2066 - Manual (Page 22)

MTS BroadcasWHS Hi-Fi Stereo System
^^Check list before you begin
^ All connections are made (see page 5).
J Your Combination VCR is plugged in.
Receivable Broadcast Types
The following are possible broadcast types with their accompanying on-screen
displays. The signal is indicated with an “ ((c ” mark while the selected audio
mode is indicated with an arrow. To change the audio mode for listening to
these broadcasts, follow “Select Audio mode for TV viewing” section.
DISPLAY
I
О
Push DISPLAY to display the broadcast
signal currently being received on-screen.
DISPLAY
SAP/
Hi-Fi
MTS Stereo and SAP broadcast
Multi-channel Television Sound Stereo {main
language) and Second Audio Program
(second language) broadcasts are being
received simultaneously. Select the STEREO
or SAP audio mode as desired.
MTS Stereo broadcast
Multi-channel Television Sound Stereo
broadcast is being received.
SAP broadcast
Second Audio Program (second language)
broadcast is being received. Select SAP
audio mode for the second language.
MONO broadcast
Normal monaural sound broadcast is being
received.
• If a stereo broadcast is weak and the display
flickers, you may want to select the MONO
audio mode for better results.
STOP 12:00AM WNET
0:00:00
# STEREO SLP
(SSAP
MONO
STOP 12:00AM WNET
0:00:00
(^STEREO SLP
9ДР
MONO
STOP 12:00AM WNET
0 : 00:00
STEREO SLP
(»SAP «-
MONO
STOP 12:00AM WNET
0 : 00:00
STEREO SLP
SAP
MONO
*r
Your tapes can be played back on Hi-Fi as well as non-Hi-Fi Combination
VCRs because the audio mode sound you select is always recorded on
the Hi-Fi tracks as well as the normal monaural track.
Select Audio Mode for TV Viewing
SAP/Hi-Fi
0
Push SAP/Hi-Fi to select the desired
audio mode as described above.
• Each push of the SAP/Hi-Fi button will change the
audio mode as shown below.
Equipped with dbx®-TV Noise
Reduction for true MTS reproduction.
dbx*-TV Noise Reduction is required
for good stereo separation and audio
fidelity.
dbx‘ is a registered trademark, and is
licensed by dbx® Tech no logy
Licensing.
22
Example: Current STOP
mode
12:00AM WNET
0 : 00:00
^STEREO SLP
SAP 4r
MONO
STOP 12:00AM WNET
0:00:00
STEREO SLP
ЧДР
MONO «-
STOP 12:00AM WNET
0:00:00
(kSTEREO «- SLP
SAP
MONO
------------------ 1-------
Push
SAP/Hi-Fi
<---------- '
Push
SAP/Hi-Fi