Panasonic OMNIVISION PV-M2066 - Manual (Page 26)

V CR Plus+ Programming
Before you begin, make sure...
n The clock is set.
□ VCR Plus+ Set Up is complete (See pages 24, 25).
TIMER Indicator
VCR Plus +
Push VCR
Plus+ to
display the VCR
Plus+ screen.
ENTER PLUSCODE
TO EXIT PUSH CLEAR
Push NUMBERED
Keys to enter the
PlusCode number.
Refer to your local TV listings.
ENTER PLUSCODE
1 2
TO ENTER PUSH VCR Plus+
TO CORRECT PUSH CLEAR
To Make Corrections
Push the CLEAR button repeatedly to delete the PlusCode
number. Then, enter the correct number.
VCR PIUS +
Push VCR Plus+
to lock in your
program.
Push 1, 2 or 3 Key to
select the program type.
1 ONCE
2 DAILY (MON-FRI)
3 WEEKLY
TO SELECT PUSH 1, 2 OR 3
TO EXIT PUSH CLEAR
To change the recording speed:
Push the SPEED button for SP, LP or SLP.
To cancel program contents:
Push the CLEAR button.
DATE START STOP CH
8 SAT 10:00A12:00A125
TO CHANGE RECORD SPEED
PUSH SPEED KEY
TO ACCEPT PUSH VCR Plus+
TO CANCEL PUSH CLEAR
If you use “A” connection on page 24, the channel shown in
the on-screen display in this step will always be the cable
box output channel number.
Use normal Timer Recording steps if:
• the PlusCode for a program is not listed.
• you anticipate the program, such as a sporting
event, to run over the scheduled stop time.
See page 19 to:
• Cancel a timer recording in progress
• Replace program contents
• Review or Clear program contents once set
WOOD, Push VCR Plus-i-
VCRPIUS+ . I i XL.
6 to complete the
program.
The PROGRAM TIMER indicator
lights on the front panel.
If you’re using a Cable Box, make
sure that it is tuned to the desired
channel and the power is left on for
timer recording.
LEAVE CABLE BOX POWER ON
FOR TIMER RECORDING
This display appears
if you use a cable
box.
For a list of publications that carry the PlusCode numbers in your area, call 1 - 800 - 258 - 4827.
You can obtain unlisted PlusCode numbers by calling 1 - 900 - 454 - 7587. Call costs approximately $.95 per minute.
Avoid overlapping program times.
An on-screen display will indicate if an invalid PlusCode number has been entered.
An on-screen display will indicate when ail timer programs are full.
26