Audio adjustment, Check list before you begin, To reset audio controls to the factory setting – Panasonic OMNIVISION PV-M2066 User Manual
Page 10: Audio adjust, Treble control, Push menu to display the menu screen, Push menu three times to exit this mode
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Audio Adjustment
Check list before you begin
□
All connections are made.
(see page 5.)
□
Your Combination VCR is plugged in.
MENU
Push MENU to
display the menu
screen.
ROTATE
WHEEL
PUSH WHEEL
WHEEL
Rotate and push the
WHEEL to first,
select “TV” and then,
to select AUDIO
ADJUST.
............. SET UP TV
CAPTION ON MUTEiCAP Cl
INPUT SELECT :TUNEP
VIDEO ADJUST
AUDIO ADJUST
SPEAKER
SELECT
SET
END
:0N
ROTATE WHEEL
PUSH WHEEL
PUSH MENU KEY
Rotate and push the
WHEEL to select
and display the
desired audio adjust
overlay.
(See description below.)
TREBLE
NORMAL
SELECT
SET
END
....... I..........
ROTATE WHEEL
PUSH WHEEL
PUSH MENU KEY
Rotate the WHEEL to adjust
and push to set the control.
• Repeat steps 3 and 4 to adjust the audio as
necessary.
Push MENU three times
to exit this mode.
• If no button is pushed within 5 minutes, the audio
adjust overlay disappears.
• Adjustment scale and setting indicator number are
displayed to assist you.
MENU
To Reset Audio Controls to the Factory Setting
Rotate and push the WHEEL to select
and set NORMAL.
All controls return to factory settings.
BASS
.......... I..........
TREBLE
.......... I..........
SELECT :
ROTATE WHEEL
SET
PUSH WHEEL
END
PUSH MENU KEY
Audio Adjust
BASS
-
‘ +
ADJUST
SET
;
ROTATE
WHEEL
: PUSH WHEEL
BASS Control
To adjust the intensity of
low frequency sound.
TREBLE
-
* +
ADJUST
SET
:
ROTATE
WHEEL
; PUSH WHEEL
TREBLE Control
To adjust the intensity of
high frequency sound.
10
The levels set here do not affect other audio equipment when
connected to the Audio Output tVR Connector.