Yamaha HTR-5835 - Manual (Page 75)

RESETTING THE FACTORY PRESETS
If you want to reset all of your unit’s parameters for any
reason, do the following. This procedure completely resets
ALL parameters, including the SET MENLJ, level, assign
and tuner presets.
Be sure this unit is in standby mode.
Press STRAIGHT (EFFECT) to select the
desired setting.
Mill syiscceciSsEi::
•• ;-.s. ...
: ‘ • : ;• .c .•
• a .
vr: :v;.
lililliiiilii
.W-Wt ;.r;yy; '
i- ■ as
/”■ ■ ■
K y
STANDBY/ON STRAIGHT (EFFECT)
1 With the unit in standby mode, hold down
STRAIGHT (EFFECT) on the front panel and
press STANDBY/ON.
“PRESET -CANCEL” appears in the trout panel
display.
RESET To reset the unit to its factory presets.
CANCEL To cancel without making any changes.
Press STANDBY/ON to confirm your
selection.
If you selected “RESET”, the unit is reset to it’s
factory presets and switches to standby mode.
If you selected “CANCEL”, the unit switches to
standby mode and nothing is reset.
While holding
down, press
- .
♦
PRESET -CANCEL
y ....................................
To cancel the initialization procedure without making any
changes, press STANDBY/ON.
71