Yamaha HTR-5835 - Manual (Page 63)

SET MENU
m Zone set
d ) multi zone
Use to specify the loeatioii of speakers connected to the
SPEAKERS B terminals.
Speaker B setting SP B
Use this feature to select the location of the front speakers
connected to the SPEAKERS B terminals.
Choices:
FRONT, ZONE B
• Select FRONT to turn on/off SPEAKERS A and B
when the speakers connected to the SPEAKERS B
terminals are set in the main room.
• Select ZONE B if the speakers connected to the
SPEAKERS B temiinals are set in another room. If
SPEAKERS A is turned OFF and SPEAKERS B is
turned ON, all the speakers including the subtvoofer in
the main room are muted and the unit outputs sound
from SPEAKERS B only.
Notes
• If you connect headphones to the PHONES jack on the unit
when “SP B” is set to ZONE B, the sound is output from both
headphones and SPEAKERS B.
• If a DSP program is selected when “SP B” is set to ZONE B.
the unit automatically enters the Virtual CINEMA DSP mode.
■ XM Radio setting E)XM RADIO SET
XM Radio antenna XM ANT.
Use to check the cun'ent reception level for the XM
Connect and Play digital antenna connected to this unit.
For the best reception, orient the XM Connect and Play
digital antenna so that a value of XX% or more is
displayed here.
Range: NONE, 0 to 100%
Note
“NONE” is displayed if the XM Connect and Play digital antenna
IS not connected to this unit. If this happens, check the antenna
connections (see page 38).
59