Yamaha HTR-5835 - Manual (Page 50)

XM SATELLITE RADIO TUNING
■ Status and error messages
If an operation takes longer than usual or an error occurs, one of the following messages may appear m the front panel
display. In this case, read the cause and follow the corresponding remedies.
Message Cause Remedy
CHECK ANTENNA The XM Connect and Play digital antenna is not
connected, or does not work properly. • Check the XM Connect and Play digital antenna
connections.
UPDATING The XM user enciy^fion code is being updated. • Wait until the enciyy>iion code is updated.
NO SIGNAL The signal is too weak. • Check the XM Connect and Play digital antenna
connections and orient it for the best reception.
LOAD 1NG It takes longer than four seconds for audio or
text data to be decoded. • Wait until the decoding process has finished.
OFF AIR The XM Satellite Radio channel you selected is
not currently broadcasting any signal. • Check the channel number again or select another
XM Satellite Radio channel.
---------- The channel Station ID (SID) is no longer
available.
- ^ ‘ -
No artist nanie/featiire or song/program title is
available.
______ _______
-------- No channels are available for the selected
categoiy. • Select another channel categoiy by pressing
CATEGORY (or A-E/CAT. J i on the remote
control) repeatedly.
46