Yamaha HTR-5835 - Manual (Page 38)

FM/AM TUNING
Press and hold MEMORY (MAN’L/AUTO FM)
for more than 3 seconds.
The preset mimber, the MEMORY and AUTO
indicators flash. After about 5 seconds, automatic
presetting starts from the frequency currently
displayed and proceeds toward the higher
frequencies.
■ Manually presetting stations
You can also store up to 40 stations (8 stations x 5 groups)
manually.
2 , 5
f T:r’
I
3 7 . 5 riH:
Ci
i f
.[py 0):
r
1 Tune into a station.
When automatic preset tuning is completed, the front
panel display shows the frequency of the last preset
See page 32 for tuning instructions.
station. VCR V-AUX DIVtCBl OVD MD.CB-R TUNER' CD
llHfi VOLUME
SP Mil ft
Notes
rl nf1 DOU
t h f i d l
....................................................
• Any stored station data existing vmder a preset number is
cleared when you store a new station under that preset number.
• If the mmiher of received stations does not reach 40 (E8),
automatic preset tuning has automatically stopped after
searching all stations,
• Only FM stations with sufficient signal strength are stored
automatically by automatic preset tuning. If the station you
want to store is weak in signal strength, tune into it manually
and store it by following the procedure in “Manually presetting
stations”.
Automatic preset tuning options:
You can select the preset number from tvhich this unit will
store FM stations and.'or begin tuning toward lotver
frecitiencies.
After pressing MEMORY in step 3:
1 Press A/B/CVD/E, then PRESET/TUNING/CH I / h
to select the preset number under which the first station
will be stored. Automatic preset tuning will stop when
stations have all been stored up to E8.
2 Press PRESET TUNING (EDIT) to turn off the colon
(:) and then press PRESET.TUNING CH I to begin
tuning toward the lower frec|uencies.
Memory back-up
The memory back-up circuit prevents the stored data
from being lost even if this unit is set in the standby
mode, the power cord is disconnected from the AC
outlet, or the power supply is temporarily cut due to
power failure. Hotvever, if the power is cut for more
than one tveek, the preset stations may be cleared. If
so, store the stations again by using the presetting
station methods.
When tuned into a station, the front panel display
shows the trequency of the station receh'ed.
2
Press MEMORY (MAN’UAUTO FM).
The MEMORY indicator flashes for about 5 seconds.
Flashes
Press A/B/C/D/E (NEXT) repeatedly to select
a preset station group (A to E) while the
MEMORY indicator is flashing.
The group letter appears. Check that the colon (:)
appears in the front panel display.
■ou.
VCR V-AUX
m
DVD MD.iCD-R TUNER ... CD.,
liiliT........... (JEPil&Ry’ VOLOMS " = "■■■ _unr
II-!
7 .
T M
U
‘“P te
U iSr 1 I »¿n
Preset group
34