Resetting all parameters to the factory presets – Yamaha HTR-5835 User Manual

Page 68

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

EDITING SOUND FIELD PARAMETERS

Repeat steps 2 through 4 as necessary to

change other program parameters.

Note

You cannot change parameter values when “MEMORY

GUARD”

set to ON. If you want to change the parameter

values, set “MEMORY GUARD” to OFF (see page 58).

Memory back-up

The memory back-up circuit prev'ents the stored data

from being lost even if this unit is set in the standby

mode, the power cord is disconnected from the AC

outlet, or the power supply is temporarily cut due to

power failure. However, if the power is cut for more

than one tveek, the parameter values will return to the

factory settings. If this happens, edit the parameter

v'alue again.

■ Resetting all parameters to the factory

presets

Use PARAM. INI (see page 58).