Power switch, Dc in jack (dc12v) – Yamaha MT100II User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
® POWER Switch
Press the POWER switch once to turn power ON, a second
time to turn power OFF. When the power is ON, the
POWER LED above the LED peak meters on the MT100II
top panel will light. Make sure that the input faders are set
to "0” and the AUX RETURN level control is set to "MIN”
before turning power on.
{Note] A muting function operates for five seconds after
power is initially turned on, after which the recorder
can be operated.
®DC IN Jack (DC12V)
The DC output cord from the YAMAHA PA100 AC Adaptor
supplied with the MTIOOn should be plugged in here. The
AC Adaptor should be plugged into a convenient AC wall
outlet.
Caution: Use only a YAMAHA PA100 AC Power Adaptor
to power your MT100H. Other AC adaptors can cause
faulty operation, and may even permanently damage your
MTIOOn.