Panasonic WV-CP160 - Manual (Page 6)

Mounting the Lens
Caution:
Before you mount the lens, loosen the screw on the side of the camera, and rotate this
ring clockwise until it stops. If the ring is not at the end, the inner glass or CCD image
2.
sensor may be damaged.
Mount the lens by turning it clockwise
on the lens mount of the camera.
Connect the lens cable to the auto iris
tens connector on the side of the cam­
era.
Screw
Caution for Mounting the Lens
The lens mount should be a CS-mount (1'-32UN) and the fens weight should be less than
450 g (0.99 lbs). If the lens is heavier, both the lens and camera should be secured by
using the supporter.
The protrusion at the rear of the tens should be as shown below:
CS-mount: Less than 8 mm (5/16")