Shutter speed (shutter) – Panasonic WV-CP160 User Manual

Page 14

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

3, Move the cursor to the area where

backlight is bright and press El to

mask that area. The mask turns to
white. (When the cursor is moved on

an area that has already been masked,

the mask and cursor start blinking.)

Blinking

4. Repeat step 3 to mask the desired

area. To cancel masking, move the
cursor to that area and press El •

5. After masking is completed, press

for 2 seconds or more. The ALC CONT

menu appears.

6. If you want to change the video output

level (picture contrast), move the "I"
cursor for LEVEL and adjust the level.

Note:

If ON is selected for the SUPER-D2 parameter, a shadow (black line) may appear at

the boundary between the bright and the dim scene. This is a natural phenomenon and

does not indicate trouble.

3. Shutter Speed (SHUTTER)

Move the cursor to the SHUTTER parame

ter and select the electronic shutter speed.
The preset values for SHUTTER change by

pressing ^ or as shown right.
Note:When ELC is selected for ALC/ELC or ON is selected for SUPER-D2, this item is not

available.

OFF

(V60)—^1/100

1/10000—1/4000 *

-*1/250

1/2000

■

* 1/500

1/1000