Panasonic PV-8665S - Manual (Page 26)

T^peO^eratioi^conth^
*lmportant; If the remote control POWER, ACTION, PROG, CHA/T, INDEX or ADD/DLT button does
not work when pressed, press the VCR button on the remote and try the button again.
Your VCR is equipped with several
time saving features as well as
convenient automatic functions making
tape operation easier than ever.
o © ©
o © ©
© © ®
© ©
Repeat Play
The VCR will play your recording over and over.
1
Press ACTION* to display the menu.
2
Press AW to select “SET UP VCR,”
and then press ► to display the
“SET UP VCR” screen.
MENU
SET UP FEATURE
SET CLOCK
SET UP CHANNEL
' l(}IOMA/LANGUE:ENGLISH
SELECT:A ▼ KEY
SET :► KEY
END
:ACT I ON KEY
Press AW to select “REPEAT
PLAY,” and then press ► to
select “ON” or “OFF."
• When “ON" is selected, the VCR plays
the tape to its end or until a blank portion
of over 30 seconds is detected (erased
portions are not considered blank).
The tape is then rewound and played again
and again until Repeat Play is turned off.
---------- SET UP VCR----------------
BEEPER
NOISY CH BLUE BACK
SELECT:* V KEY
SET :► KEY
END lACTION KEY
OFF
ON
ON
4
Press ACTION twice to return to the
normal screen.
One Minute Skip
The VCR rapidly skips over one minute of tape.
A
Press ZERO/1 MIN in Play mode.
• The VCR will go into FF search mods and skip over 60 seconds of
recorded time. Normal playback will ttien resume.
Auto Operation Functions
Auto Playback
When a tape is inserted, the power
turns on (Auto). If the record tab* is
removed, playback begins (Auto).
Auto Rewind
When a tape reaches its end during
playback, fast forward or manual
record, the VCR will rewind and go into
Stop mode.
Playback Auto Eject
(Repeat Play is “OFF.”)
When a tape without a record tab* is
played to its end, the VCR will rewind
and then eject the tape.
Memory Rewind Off
When the POWER button is pressed
during rewind, the VCR will turn off
after rewind is complete.
* For record tab information, see page 5.
26
Zero Search
To quickly return to a specific tape location.
3 Press DISPLAY to display the Time
Counter overlay during playback. b
Press COUNTER RESET
to reset the Time Counter to
"0:00:00" at the desired position.
STOP 12:00AM ABC
i:00:30
»STEREO
»SAP
MONO 4
SP
STOP 12:00AM ABC
0 : 00:00
»STEREO SP
»SAP
MONO •*
C Continue playback, rewind,
or fast forward.
d Press ZERO/1 MIN in Stop mode
when you want to return to “0:00:00.”
• The VCR will go into FF or REW mode
and stop at the last point the Time
Counter was set to 0:00:00.