Panasonic PV-8665S - Manual (Page 25)

Important for Program Index Search:
Timer recordings must be
recorded back to back in order for
them to be placed on the Program
Index list. If a timer recording is
foilowed by a function, such as
REW or PLAY, the data is iost.
Program Index Search
(For timer recordings only)
This feature allows you to choose a timer recorded program from a
Program Index list and then start a search for that program.
Once the tape is ejected or normal recording is started, all program
Index data are deleted. _______________
1
Press INDEX to display the
“SELECT SEARCH MODE” screen.
Press AV to select "PROGRAM
INDEX SEARCH,” and then press ►
to display the “PROGRAM INDEX"
screen.
SELECT SEARCH MODE
INDEX SEARCH
PROGRAM INDEX SEARCH
PROGRAM INDEX
DATE START CATEGORY
12/28 10:O0A SPORTS ABCD
12:30P MOVIE
0:OOP COWEOY
3:00P MUSIC
NBC
CSC
NBC
SELECT:* ▼ KEY
SEARCH:► KEY
END : INDEX KEY
Press
AT
to select the desired
recorded program, and then
press ► to start the forward or
rewind search.
• When the designated program is reached,
the VCR automatically goes into Playback
mode.
REWIND
c
FAST
FORWARD
Index Scan
(For normal and/or timer recordings)
This feature allows you to scan (forward or reverse)
each recording for 10 seconds in Playback mode.
a Press INDEX to display the
“SELECT SEARCH MODE” screen.
• This screen appears only it there are timer
recordings on the Program Index list. If this
screen does not appear, go to step c.
b
Press
AT
to select “INDEX
SEARCH," and then press ►
to display the “INDEX” screen.
C Press REW or FF to begin the scan.
• As each index mark is reached,
a short playback will be performed
after which FF or REW resumes.
d Press PLAY to cancel the scan
and begin playback.
• You may also press STOP to stop the tape.
Start here
4
SELECT SEARCH MODE
PROGRAM INDEX SEARCH
SELECT:* T KEY
SET :► KEY
END :INDEX KEY
Current I Program
I
^REwlk- P r e s s F F I — w
STOP
t Indexed Point
-¥tr Play (for about 10 seconds)
— Fast Forward or Rewind
STOP'
25