Eclipse Combustion EGA4 - Manual (Page 7)

Instruction Manual MM850481 ed.01
1.2 Accuracies and ranges
Parameter Sensor type Range Resol. Max
response
Accuracy
O
2
Electrochemical from 0 to 25.0% 0.1% 20 sec. ±0.1% vol.
CO
H
2
compensated up
to 1000ppm
Electrochemical from 0 to 8000 ppm 1 ppm 50 sec.
±10 ppm <300 ppm
±4% rdg up to 2000 ppm
±10% rdg >2000 ppm
CO
Electrochemical from 0 to 20000 ppm 1 ppm 40 sec.
±10 ppm <300 ppm
±4% rdg up to 2000 ppm
±10% rdg >2000 ppm
NO Electrochemical from 0 to 4000 ppm 1 ppm 40 sec. ±5 ppm <125 ppm
±4% rdg >125 ppm
NO
2
Electrochemical from 0 to 1000 ppm 1 ppm 50 sec. ±5 ppm <125 ppm
±4% rdg >125 ppm
NO
x
Calculated from 0 to 5000 ppm 1 ppm
SO
2
Electrochemical from 0 to 4000 ppm 1 ppm 40 sec. ±5 ppm <125 ppm
±4% rdg >125 ppm
CO
2
Calculated from 0 to 100% 0.1 %
Tair Pt100 from -10 to 100 °C 0.1 °C ±(0.2% rdg+0.15°C)
Tgas Tc K from -10 to 1000 °C 0.1 °C ±(0.3% rdg+0.3°C)
∆T Calculated from 0 to 1000 °C 0.1 °C
Tflow Tc K from -10 to 100 °C 0.1 °C ±(0.3%rdg+0.3°C)
Treturn Tc K from -10 to 100 °C 0.1 °C ±(0.3% rdg+0.3°C)
Pressure/Draft &
∆P Piezo -10hPa to +100 hPa 0.01 hPa ±1% rdg
Excess air Calculated from 1.00 to infinite 0.01
Efficiency Calculated from 0 to 100% 0.1 %
Gas speed Pitot tube From 0 to 100.0 m/s 0.1 m/s
Smoke index External pump from 0 to 9
Technical units and ranges can be converted directly from ppm to mg/Nm 3 , mg/kwh and from hPa to mmH
2
O, mbar or inH
2
O.
The relative accuracy shown are expressed as absolute or % of rdg errors at -5°C to +40°C ambient temperature.
The maximum response time shown is referred to 90% signal changes.
The pressure relative accuracy shown is valid only after the auto-zero procedure.
Specifications may change without notice.
7